BLEACH
PRODUCTION
Apart from Beach been used in laundry as stain remover, it is also a good
disinfectant that can be used for cleaning the home and for washing of toilet
due to the presence of chlorine in it.
RAW MATERIALS NEEDED
Caustic soda 1kg
Soda ash 1/2kg
Calcium hypochloride 1/2kg
Hydro-sulphide 1/16kg or 2 -3 wraps
Most people use cooking salt in replace of the hydrosulphide why some use non
of the two. The cost of producing bleach with caustic soda, soda ash and calcium
hypochloride is between N1000 and
N2000.
EQUIPMENTS NEEDED
There are no special equipment needed for it as mentioned earlier. All you need
is a big bowl or bucket of 20litres capacity, a turn stick and any other
plastic bowl that could be of help during the production. Then you are good to
go.
STEPS TO PRODUCING IT
Step 1: Put some cups of water into the big bowl or bucket and
carefully add the caustic soda and stir carefully so that the water doesn’t
splash you because it is acidic. The solution will become hot.
Step 2: Add more water to the solution and add the soda ash to it and
stir until a solution is or slightly formed. That is until it is finally or
partially dissolved.
Step 3: Add the hydrosulphide and continue to stir until it is
properly mixed.
Step 4: Add the hypochloride and stir continuously.
Step 5: Add a enough water to it and then all it to settle down for 24
hours though could be used immediately.
Step 6: Filter the clean liquid out and through away the residue. The total
volume should be about 20litres.
Post a Comment
0Comments