How to view videos recorded by using xmeye on PC client

Add the DVR system to the Client

Option 1: Add the DVR system automatically

Please make sure the DVR system and your PC are connected with the same router.

Step 1:

Please log in to the client with the default User Name (admin) and Password (admin).

Step 2:

Click OK to add the DVR system automatically.

Step 3:

Tap YES on the pop-up window of “This operation may modify the device’s IP address, whether to continue?”

Step 4:

The DVR you added will be listed on the interface of Device Manager after 10s searching.

Invalid Password:

The VMS Client cannot load the password of the DVR system automatically, you need to modify it by clicking .

Connected:

The DVR system is ready to use.

Offline:

Please check if the DVR system and PC are connected to the same router.

Timeout:

Network may be disconnected, please click to refresh. Click the link below to continue from their official site.

Instructions for using xmeye PC client